TUMAsia_SpecialistDiplomaWebbanner_BD_17102017_v1-01

SPECIALIST DIPLOMA IN ADVANCED DIGITAL MANUFACTURING

 

**FINAL PREVIEW SESSION for our Specialist Diploma! Scroll down to register for the free preview to find out more!** 

 

With the announcement of the Smart Nation initiative in Singapore, the national effort aims to create a better future through technology enabled solutions. As a result, Industrie 4.0 (Industry 4.0), where the internet of things and automation are revolutionizing manufacturing, has been a major topic of discussion in Singapore. Moving forward, the industry is looking to upskill its workforce to further equip the next generation’s workforce. In 2016, Festo Didactic SE and TUM Asia signed a Memorandum of Understanding (MoU) to explore and develop joint education programmes, for students and employees interested in upskilling themselves in the areas of Automation Technology and Industrie 4.0 in Singapore.

 

One of the outcomes from the MoU would be the launch of the Specialist Diploma in Advanced Digital Manufacturing, which is the first Industrie 4.0 Specialist Diploma being offered in Singapore. This specialist diploma is recommended for individuals who are interested to

 

    • Upgrade your skills & learn from German experts who are the key drivers of Industrie 4.0
      Modules are taught by experts from TUM and qualified Festo Didactic trainers

 

    • Learn from a Block Teaching system
      Quality instructional time emphasized using a Block Teaching system (5 full days per module)

 

    • Gain hands-on experience using Industrie 4.0 training equipment
      Equips participants with relevant Industrie 4.0 knowledge and skills to make an impact in the industry

 

    • Receive Post Training Project mentorships
      Application of the knowledge learnt into the participant’s company

WHO SHOULD ATTEND

  • Electrical and Mechanical Engineers interested to learn new skills in advanced manufacturing
  • IT, Infocomm, Science and Technology-related Professionals looking to make a career switch to manufacturing sector

 

COURSE OVERVIEW

  • Up to 90% course fee funding for Singaporeans and Permanent Residents
  • Course will adopt MOE’s CET Qualifications Framework, where participants will be required to complete two Post-Diploma Certificates (PDCs) to be awarded the Specialist Diploma
  • The 2 PDCs are Advanced Manufacturing and Digital Manufacturing
  • Each PDC comprises of 2 theoretical modules and 1 project module
  • To meet a wider range of training needs, participants can opt to enroll in individual theoretical modules and receive Modular Certificates after successfully completing them
  • Upon completion, participants can carry out a Post-Specialist Diploma project at their companies, under the mentorship of our pool of experts

CERTIFICATION

Participants will be awarded the Specialist Diploma in Advanced Digital Manufacturing upon successful completion of both of the following Post-Diploma Certificates

 

Post Diploma Certificate 1: Advanced Manufacturing 

  • Essentials of Advanced Manufacturing Systems (Theoretical Module)
  • Manufacturing Management (Theoretical Module)
  • Advanced Manufacturing Project (Project Module)

 

Post Diploma Certificate 2: Digital Manufacturing 

  • Cyber Physical Systems (Theoretical Module)
  • Industrial Internet of Things  (Theoretical Module)
  • Digital Manufacturing Project (Project Module)

DOWNLOAD THE COURSE BROCHURE

Module synopsis and course details are available within the Course Brochure. To view them, you may download the programme brochure below.

Screen Shot 2017-10-07 at 11.51.25 PM

 

 

 

 

 

 

 

 

 

 

 

 

 

Download The Course Brochure Now

Registration is open from 16 October 2017 – 10 December 2017.

 

CLICK TO DOWNLOAD >> Specialist Diploma in Advanced Digital Manufacturing Registration Form << 

 

To register for the Specialist Diploma in Advanced Digital Manufacturing, participants are required to complete the following steps:

Step #1: Download the above Registration Form and fill in the necessary fields.

Step #2: Email the completed Registration Form and required supporting documents to TUM Asia Office of Executive Development (exd@tum-asia.edu.sg) with the email title: “SD in ADM Registration – <Your Name>”

Step #3: Applications will be screened and shortlisted candidates will be contacted via email by the TUM Asia Executive Development Team.

Step #4: Complete the payment procedure to successfully enrol into the course.

If you have any questions, please contact us at exd@tum-asia.edu.sg or give us a call at +65 6777 7407.

COURSE FEES

Eligibility Criteria Course Fees after Funding (before 7% GST)
All Singaporeans and Permanent Residents aged 21 and above SGD 5,400Course fee funding support of up to 70%
Singaporean or Permanent Resident employees fully sponsored by non-SMEs
Singaporean or Permanent Resident employees fully sponsored by SMEs· Enhanced Training Support for Small & Medium Enterprises (SMEs) scheme, subject to eligibility criteria. SGD 1,800Course fee funding support of up to 90%
Singaporeans aged 40 years and above· SkillsFuture Mid-career Enhanced Subsidy (MCES), subject to eligibility criteria.
Singaporeans aged 35 years old and above with earnings not more than SGD$2,000 · Workfare Training Support (WTS) Scheme, subject to eligibility criteria SGD 900Course fee funding support of up to 95%
Singaporeans aged 25 years old and above are eligible for SkillsFuture Credit SkillsFuture Credit can be used to offset course fees

All Theoretical and Project Modules (Before course fee funding and 7% GST): SGD 18,000

Per Theoretical Module (Before course fee funding and 7% GST): SGD 3,000

 

 

 

COURSE VENUE

SIT@SP Building, Level 5 510 Dover Road Singapore 139660

 

 

COURSE DURATION

January 2018 – September 2018

Post Diploma Certificate 1: Advanced Manufacturing (140 hours)

  • Essentials of Advanced Manufacturing Systems - January 2018 (5 full days, 40 hours)
  • Manufacturing Management - February 2018 (5 full days, 40 hours)
  • Advanced Manufacturing Project - March 2018 (7 full days, 60 hours)

 

Post Diploma Certificate 2: Digital Manufacturing (140 hours)

  • Cyber Physical Systems - July 2018 (5 full days, 40 hours)
  • Industrial Internet of Things - August 2018 (5 full days, 40 hours)
  • Digital Manufacturing Project - September 2018 (7 full days, 60 hours)

Post Diploma Certificate 1: Advanced Manufacturing (140 hours) 

Course participants will be equipped with the essential knowledge on advanced manufacturing systems, which makes it possible to manage and optimize the manufacturing process through modelling, simulating, and analyzing all the machines and input materials.

 

    • Essentials of Advanced Manufacturing SystemsThis module provides an overview on the essentials of advanced manufacturing systems which involve more effective use of technology, management systems, production techniques and processes.

 

    • Manufacturing ManagementThis module aims to equip modern manufacturing engineers and managers with deep insight on effective organization of manufacturing processes within companies.

 

    • Advanced Manufacturing ProjectThis will be in partnership with Festo Didactic to provide a project setting for course participants to apply knowledge and skills acquired in the two theoretical modules.

 

Post Diploma Certificate 2: Digital Manufacturing (140 hours) 

Course participants will be trained in the integrations of computation, networking, and physical processes to set up cyber physical systems. Course participants will also be trained in Industrial Internet of Things which incorporates machine to machine communication, harnessing of sensor data, and machine learning techniques to analyze the data.

 

    • Cyber Physical Systems This module trains participants to understand and apply software development approaches for development of cyber production systems. Model-based approaches will be presented especially in aspects such as modularity, variants and versions.

 

    • Industrial Internet of ThingsThis module covers various aspects of IOT which include sensing, actuation, processing, and communication, that lead to development of skills and experiences employed in designing novel Industrial IOT systems.

 

    • Digital Manufacturing ProjectThis will be in partnership with Festo Didactic to provide a project setting for course participants to apply knowledge and skills acquired in the two theoretical modules.

 

Following the completion of the Specialist Diploma in Advanced Digital Manufacturing, course participants are encouraged to embark on 12-month Post Specialist Diploma Projects at their respective companies under the mentorship of our pool of experts.

 

The following conditions apply:

  • The projects’ outcomes should contribute towards productivity improvement at the companies;
  • Up to 90% of fees (excluding GST) per Small Medium Enterprises (SMEs ) subject to a cap of SGD 20,700 per company;
  • Up to 70% of fees (excluding GST) per non-SME subject to a cap of SGD 16,100 per company;
  • Each company is eligible to the mentorship support grant of one project per company.

© 2017 Technische Universität München Asia
German Institute of Science & Technology - TUM Asia Pte Ltd
CPE Reg. No. 200105229R | Registration Period 13.06.2017 - 12.06.2023